310 Stainless Steel: Properties and Key Applications
Share
Table Of Content
Table Of Content
310 Stainless Steel is classified as an austenitic stainless steel, known for its high chromium and nickel content, which provides excellent oxidation resistance and high-temperature strength. The primary alloying elements in 310 stainless steel include approximately 24% chromium and 19% nickel, which contribute to its superior corrosion resistance and mechanical properties.
Comprehensive Overview
310 stainless steel is particularly valued for its ability to withstand extreme temperatures and corrosive environments, making it suitable for applications in various industries, including aerospace, chemical processing, and power generation. Its high chromium content enhances its resistance to oxidation and scaling at elevated temperatures, while the nickel content improves its ductility and toughness.
Advantages and Limitations
| Advantages | Limitations |
|---|---|
| Excellent high-temperature strength | Higher cost compared to lower alloy grades |
| Superior oxidation resistance | Limited weldability compared to some other stainless steels |
| Good resistance to sulfuric and phosphoric acids | Susceptible to stress corrosion cracking in certain environments |
| High ductility and toughness | Requires careful handling during fabrication to avoid work hardening |
310 stainless steel holds a significant position in the market due to its unique properties, making it a preferred choice for high-temperature applications. Historically, it has been used in applications such as furnace components, heat exchangers, and gas turbine parts, showcasing its versatility and reliability.
Alternative Names, Standards, and Equivalents
| Standard Organization | Designation/Grade | Country/Region of Origin | Notes/Remarks |
|---|---|---|---|
| UNS | S31000 | USA | Closest equivalent to AISI 310 |
| AISI/SAE | 310 | USA | Commonly used designation |
| ASTM | A240 | USA | Standard specification for stainless steel plates |
| EN | 1.4845 | Europe | Similar properties, minor compositional differences |
| JIS | SUS310 | Japan | Equivalent grade with similar characteristics |
| GB | 00Cr25Ni20 | China | Closest equivalent with slight variations |
The differences between these equivalent grades can affect selection based on specific application requirements, such as temperature limits and corrosion resistance. For example, while 1.4845 offers similar properties, it may have slightly different mechanical characteristics that could influence performance in specific environments.
Key Properties
Chemical Composition
| Element (Symbol and Name) | Percentage Range (%) |
|---|---|
| Cr (Chromium) | 24.0 - 26.0 |
| Ni (Nickel) | 19.0 - 22.0 |
| C (Carbon) | ≤ 0.08 |
| Mn (Manganese) | ≤ 2.0 |
| Si (Silicon) | ≤ 1.0 |
| P (Phosphorus) | ≤ 0.045 |
| S (Sulfur) | ≤ 0.03 |
Chromium is crucial for enhancing corrosion resistance and oxidation resistance, while nickel contributes to the steel's toughness and ductility. The low carbon content minimizes the risk of carbide precipitation, which can lead to intergranular corrosion.
Mechanical Properties
| Property | Condition/Temper | Typical Value/Range (Metric - SI Units) | Typical Value/Range (Imperial Units) | Reference Standard for Test Method |
|---|---|---|---|---|
| Tensile Strength | Annealed | 515 - 750 MPa | 75 - 109 ksi | ASTM E8 |
| Yield Strength (0.2% offset) | Annealed | 205 - 310 MPa | 30 - 45 ksi | ASTM E8 |
| Elongation | Annealed | 40 - 50% | 40 - 50% | ASTM E8 |
| Hardness (Rockwell B) | Annealed | 70 - 90 | 70 - 90 | ASTM E18 |
| Impact Strength (Charpy) | -20°C | 30 J | 22 ft-lbf | ASTM E23 |
The combination of high tensile and yield strength, along with good elongation, makes 310 stainless steel suitable for applications requiring structural integrity under mechanical loading. Its impact strength at low temperatures ensures reliability in cryogenic applications.
Physical Properties
| Property | Condition/Temperature | Value (Metric - SI Units) | Value (Imperial Units) |
|---|---|---|---|
| Density | Room Temperature | 7.9 g/cm³ | 0.285 lb/in³ |
| Melting Point | - | 1400 - 1450 °C | 2552 - 2642 °F |
| Thermal Conductivity | Room Temperature | 16.2 W/m·K | 112 BTU·in/ft²·h·°F |
| Specific Heat Capacity | Room Temperature | 500 J/kg·K | 0.12 BTU/lb·°F |
| Electrical Resistivity | Room Temperature | 0.72 µΩ·m | 0.0000013 Ω·in |
The density of 310 stainless steel contributes to its strength, while its thermal conductivity and specific heat capacity make it suitable for high-temperature applications where heat transfer is critical.
Corrosion Resistance
| Corrosive Agent | Concentration (%) | Temperature (°C/°F) | Resistance Rating | Notes |
|---|---|---|---|---|
| Chlorides | 3-10 | 20-60 / 68-140 | Fair | Risk of pitting |
| Sulfuric Acid | 10-30 | 20-60 / 68-140 | Good | Resistant at moderate temps |
| Phosphoric Acid | 10-50 | 20-60 / 68-140 | Excellent | Very good resistance |
| Atmospheric Conditions | - | - | Excellent | Resistant to oxidation |
310 stainless steel exhibits excellent resistance to a variety of corrosive environments, particularly in acidic conditions. Its performance against chlorides is moderate, and care should be taken to avoid pitting corrosion. Compared to grades like 304 and 316, 310 offers superior high-temperature oxidation resistance but may not perform as well in chloride-rich environments.
Heat Resistance
| Property/Limit | Temperature (°C) | Temperature (°F) | Remarks |
|---|---|---|---|
| Max Continuous Service Temp | 1150 °C | 2100 °F | Suitable for high-temperature applications |
| Max Intermittent Service Temp | 1050 °C | 1922 °F | Can withstand short-term exposure at higher temps |
| Scaling Temperature | 900 °C | 1652 °F | Begins to oxidize significantly above this temperature |
At elevated temperatures, 310 stainless steel maintains its strength and oxidation resistance, making it ideal for furnace applications and heat exchangers. However, prolonged exposure to temperatures above 1150 °C can lead to scaling and degradation of material properties.
Fabrication Properties
Weldability
| Welding Process | Recommended Filler Metal (AWS Classification) | Typical Shielding Gas/Flux | Notes |
|---|---|---|---|
| TIG | ER310 | Argon | Good for thin sections |
| MIG | ER310 | Argon + CO2 mix | Suitable for thicker sections |
| SMAW | E310 | - | Requires preheat for thick sections |
310 stainless steel can be welded using various methods, but care must be taken to avoid cracking. Preheating and post-weld heat treatment are recommended to relieve stresses and improve weld integrity.
Machinability
| Machining Parameter | 310 Stainless Steel | AISI 1212 | Notes/Tips |
|---|---|---|---|
| Relative Machinability Index | 30% | 100% | Requires slower speeds |
| Typical Cutting Speed | 20-30 m/min | 60-80 m/min | Use carbide tools for best results |
Machinability of 310 stainless steel is lower compared to free-machining steels like AISI 1212. Optimal conditions include using sharp tools and appropriate cutting fluids to minimize work hardening.
Formability
310 stainless steel exhibits good formability, allowing for cold and hot working processes. However, due to its high strength, it may require larger bend radii to avoid cracking during forming operations.
Heat Treatment
| Treatment Process | Temperature Range (°C/°F) | Typical Soaking Time | Cooling Method | Primary Purpose / Expected Result |
|---|---|---|---|---|
| Solution Annealing | 1000 - 1100 °C / 1832 - 2012 °F | 1 hour | Air or water | Dissolve carbides, improve ductility |
| Stress Relief | 600 - 800 °C / 1112 - 1472 °F | 1 hour | Air | Reduce residual stresses |
Heat treatment processes such as solution annealing enhance the ductility and toughness of 310 stainless steel by dissolving carbides and refining the microstructure.
Typical Applications and End Uses
| Industry/Sector | Specific Application Example | Key Steel Properties Utilized in this Application | Reason for Selection (Brief) |
|---|---|---|---|
| Aerospace | Exhaust systems | High-temperature strength, oxidation resistance | Required for extreme conditions |
| Chemical Processing | Heat exchangers | Corrosion resistance, thermal stability | Effective in acidic environments |
| Power Generation | Boiler tubes | High strength, thermal conductivity | Essential for heat transfer |
| Oil and Gas | Flare stacks | High-temperature performance | Safety in extreme conditions |
Other applications include:
- Furnace components
- Kiln linings
- Industrial ovens
- Heat treatment fixtures
The selection of 310 stainless steel in these applications is primarily due to its ability to withstand high temperatures and corrosive environments, ensuring longevity and reliability.
Important Considerations, Selection Criteria, and Further Insights
| Feature/Property | 310 Stainless Steel | AISI 316 | AISI 304 | Brief Pro/Con or Trade-off Note |
|---|---|---|---|---|
| Key Mechanical Property | High strength | Moderate strength | Lower strength | 310 is better for high temps |
| Key Corrosion Aspect | Excellent in acids | Good in chlorides | Fair in acids | 310 excels in high-temperature acids |
| Weldability | Moderate | Good | Excellent | 310 requires more care in welding |
| Machinability | Low | Moderate | High | 310 is harder to machine |
| Formability | Moderate | Good | Excellent | 310 requires larger bend radii |
| Approx. Relative Cost | High | Moderate | Low | Cost reflects performance benefits |
| Typical Availability | Moderate | High | Very High | 304 is the most common stainless steel |
When selecting 310 stainless steel, considerations include its cost-effectiveness, availability, and specific performance requirements in high-temperature and corrosive environments. While it may be more expensive than other grades, its unique properties often justify the investment in critical applications.
In summary, 310 stainless steel is a versatile and robust material, ideal for high-temperature and corrosive applications. Its unique properties make it a preferred choice in various industries, ensuring safety and reliability in demanding environments.
Data Sources & Verification
Chemical composition and mechanical property values on this page are compiled from published material standards and cross-referenced against the equivalent designations listed above (UNS S31000, ASTM A240, EN 1.4845, JIS SUS310, GB 00Cr25Ni20). Values are typical or nominal and vary with product form, thickness, and heat treatment; confirm against the governing standard and mill test certificate before design or procurement use.
Design tools: Working with this grade structurally? Use our free Load Capacity Calculator, Span Calculator, and Steel Beam Calculator. Estimate material weight with our steel weight calculators.
Technically reviewed by Dr. Zhang Zhiwei — former Senior Technical Specialist, Baosteel Group; member, Chinese Society for Metals. How we compile our data · spotted an error? Tell us and we will review it.
6 comments
This is a very thorough technical breakdown, especially regarding the scaling limits which are often overlooked. I’m currently looking at the feasibility of using 310 stainless for a high-heat processing unit, but the cost-benefit ratio is tricky. In terms of risk management, I’ve been trying to find a solid framework for verifying the long-term reliability of suppliers and infrastructure stability under heavy loads—much like the due diligence models used to verify large-scale operators in other high-risk digital sectors, as seen in this analysis at https://GuiadeEcuabetColumbia.com regarding operational transparency and licensing. Do you think a similar “verification-first” approach is applicable when vetting specialized steel suppliers for 2026 projects, or is the industry still relying mostly on legacy certifications?
Excelente análisis técnico sobre el acero 310, especialmente útil la sección sobre la temperatura de escamado a 900 °C para el diseño de hornos. Estoy evaluando su uso para una infraestructura térmica en el sector industrial, pero me preocupa la gestión de riesgos con proveedores internacionales ante la volatilidad de precios en 2026. Al investigar modelos de auditoría técnica y transparencia operativa para validar la fiabilidad de grandes operadores, encontré este análisis sobre el cumplimiento y licencias en GuiadeEcuabetColumbia.com que detalla cómo verifican la legitimidad institucional bajo cargas de alto tráfico. ¿Consideran que un marco de verificación similar, centrado en la transparencia de licencias y solvencia del operador, es aplicable para auditar a los proveedores de aleaciones especiales antes de realizar compras a gran escala, o existen certificaciones más específicas en la metalurgia que garanticen esa estabilidad financiera?
This is a very thorough technical breakdown, especially regarding the scaling limits which are often overlooked. I’m currently looking at the feasibility of using 310 stainless for a high-heat processing unit, but the cost-benefit ratio is tricky. In terms of risk management, I’ve been trying to find a solid framework for verifying the long-term reliability of suppliers and infrastructure stability under heavy loads—much like the due diligence models used to verify large-scale operators in other high-risk digital sectors, as seen in this analysis at https://guiadeBet365brasil.com regarding operational transparency and licensing. Do you think a similar “verification-first” approach is applicable when vetting specialized steel suppliers for 2026 projects, or is the industry still relying mostly on legacy certifications?
Vielen Dank für die detaillierte Aufschlüsselung der 310-Eigenschaften, besonders die Daten zur Verzunderungstemperatur sind für unsere Projektplanung extrem hilfreich. Da wir aktuell die Kosten für Hochtemperaturkomponenten in einer Industrieanlage optimieren, stellt sich uns die Frage nach der Wirtschaftlichkeit: Gibt es eine etablierte Strategie für den hybriden Einsatz von 310er Stahl nur in den kritischen Heißzonen, während für die restliche Struktur günstigere Legierungen verwendet werden, oder riskieren wir damit zu große Probleme bei der thermischen Ausdehnung an den Schweißnähten? Ich versuche gerade, ein ähnliches Modell zur Risikobewertung und Kosten-Nutzen-Analyse zu finden, wie man es bei der Evaluierung von stabilen Betreibern in anderen Hochrisikosektoren nutzt – ich habe dazu diese technische Analyse unter https://GuiadeBetwayargentina.com gelesen, wo es um die Stabilität von Infrastrukturen unter hoher Last geht. Lässt sich ein solches Framework für die Materialauswahl im Anlagenbau adaptieren, um die Langlebigkeit der 310-Module sicherzustellen, ohne das Budget zu sprengen?
This is an excellent breakdown of 310 stainless steel, particularly the comparison with 304/316 grades. We’ve been looking into 310 for furnace components in a project near Madrid, and the scaling temperature data provided here is a lifesaver. Given the high cost of 310, I’m curious if you’ve seen many firms opting for a modular approach—perhaps using 310 only for the most critical heat zones while using cheaper alloys elsewhere? I’ve been researching similar “modular vs. full-stack” selection strategies in the software sector, specifically how operators choose between different infrastructure setups at https://igaming-solution.com to balance cost and scalability. Is there a similar technical framework you’d recommend for deciding when the jump to 310 is strictly necessary versus when a lower-cost “modular” steel setup might suffice, or does that compromise the structural integrity too much in high-temp environments?