L2 Tool Steel: Properties and Key Applications

Table Of Content

Table Of Content

L2 Tool Steel is classified as a high-carbon, high-chromium tool steel, primarily used for applications requiring high wear resistance and toughness. This steel grade is characterized by its excellent hardenability and ability to maintain hardness at elevated temperatures, making it suitable for various tooling applications. The primary alloying elements in L2 Tool Steel include carbon (C), chromium (Cr), and manganese (Mn), which significantly influence its properties.

Comprehensive Overview

L2 Tool Steel is known for its exceptional wear resistance, which is attributed to its high carbon content (typically around 1.5% to 2.0%) and chromium content (approximately 4.0% to 5.0%). These elements contribute to the formation of hard carbides, enhancing the steel's hardness and wear resistance. The presence of manganese aids in improving toughness and hardenability, which are crucial for maintaining performance under stress.

Advantages of L2 Tool Steel:
- High Wear Resistance: Ideal for cutting tools and dies due to its ability to withstand abrasive wear.
- Good Toughness: Maintains structural integrity under impact loads, reducing the risk of chipping or cracking.
- Excellent Hardening Properties: Can achieve high hardness levels through heat treatment, making it suitable for various applications.

Limitations of L2 Tool Steel:
- Brittleness at High Hardness Levels: While it can achieve high hardness, this can lead to brittleness, necessitating careful design considerations.
- Corrosion Susceptibility: Compared to stainless steels, L2 Tool Steel may have lower resistance to corrosion, requiring protective coatings in certain environments.

Historically, L2 Tool Steel has been a staple in the manufacturing of cutting tools, dies, and molds, owing to its balance of hardness and toughness. Its market position remains strong, particularly in industries where precision tooling is critical.

Alternative Names, Standards, and Equivalents

Standard Organization Designation/Grade Country/Region of Origin Notes/Remarks
UNS T30202 USA Closest equivalent to AISI D2 with minor compositional differences.
AISI/SAE L2 USA Commonly used designation in North America.
ASTM A681 USA Specification for tool steels.
EN 1.2379 Europe Equivalent grade with similar properties.
JIS SKD11 Japan Similar performance characteristics, often used interchangeably.

The differences between equivalent grades can significantly affect performance. For instance, while L2 and SKD11 may exhibit similar hardness, the specific heat treatment processes and resultant microstructures can lead to variations in toughness and wear resistance.

Key Properties

Chemical Composition

Element (Symbol and Name) Percentage Range (%)
C (Carbon) 1.50 - 2.00
Cr (Chromium) 4.00 - 5.00
Mn (Manganese) 0.30 - 0.60
Si (Silicon) 0.20 - 0.50
Mo (Molybdenum) 0.10 - 0.50

The primary role of the key alloying elements in L2 Tool Steel is as follows:
- Carbon (C): Increases hardness and wear resistance through the formation of carbides.
- Chromium (Cr): Enhances hardenability and contributes to wear resistance.
- Manganese (Mn): Improves toughness and helps in the hardening process.

Mechanical Properties

Property Condition/Temper Test Temperature Typical Value/Range (Metric) Typical Value/Range (Imperial) Reference Standard for Test Method
Tensile Strength Quenched & Tempered Room Temp 1500 - 2000 MPa 217 - 290 ksi ASTM E8
Yield Strength (0.2% offset) Quenched & Tempered Room Temp 1200 - 1800 MPa 174 - 261 ksi ASTM E8
Elongation Quenched & Tempered Room Temp 5 - 10% 5 - 10% ASTM E8
Hardness Quenched & Tempered Room Temp 58 - 62 HRC 58 - 62 HRC ASTM E18
Impact Strength Quenched & Tempered -20°C (-4°F) 20 - 40 J 15 - 30 ft-lbf ASTM E23

The combination of high tensile and yield strength, along with significant hardness, makes L2 Tool Steel suitable for applications that involve high mechanical loading and require structural integrity. Its toughness ensures that it can withstand impact loads without failure.

Physical Properties

Property Condition/Temperature Value (Metric) Value (Imperial)
Density Room Temp 7.85 g/cm³ 0.284 lb/in³
Melting Point/Range - 1425 - 1500 °C 2600 - 2730 °F
Thermal Conductivity Room Temp 25 W/m·K 14.5 BTU·in/h·ft²·°F
Specific Heat Capacity Room Temp 0.46 kJ/kg·K 0.11 BTU/lb·°F
Electrical Resistivity Room Temp 0.0006 Ω·m 0.00002 Ω·in

Key physical properties such as density and melting point are critical in applications where thermal stability and weight considerations are essential. The thermal conductivity indicates that L2 Tool Steel can dissipate heat effectively, which is beneficial in high-speed machining applications.

Corrosion Resistance

Corrosive Agent Concentration (%) Temperature (°C) Resistance Rating Notes
Chlorides 5 - 10 20 - 60 Fair Risk of pitting corrosion.
Acids 10 - 20 20 - 50 Poor Not recommended for use.
Alkaline Solutions 5 - 15 20 - 60 Fair Susceptible to stress corrosion cracking.

L2 Tool Steel exhibits moderate corrosion resistance, particularly in chloride environments, where it is prone to pitting. Compared to stainless steels like AISI 304, which offer superior corrosion resistance, L2 requires protective coatings or surface treatments in corrosive environments. Its performance in acidic and alkaline conditions is notably poor, making it unsuitable for applications exposed to such environments.

Heat Resistance

Property/Limit Temperature (°C) Temperature (°F) Remarks
Max Continuous Service Temp 400 °C 752 °F Suitable for prolonged exposure.
Max Intermittent Service Temp 500 °C 932 °F Short-term exposure without significant degradation.
Scaling Temperature 600 °C 1112 °F Begins to lose hardness and toughness.

At elevated temperatures, L2 Tool Steel maintains its hardness and toughness up to a certain limit. However, beyond 400 °C, it may begin to experience degradation in mechanical properties, particularly in high-stress applications. Oxidation can occur at higher temperatures, necessitating protective measures.

Fabrication Properties

Weldability

Welding Process Recommended Filler Metal (AWS Classification) Typical Shielding Gas/Flux Notes
MIG ER70S-6 Argon + CO2 Preheat recommended to avoid cracking.
TIG ER80S-D2 Argon Requires post-weld heat treatment.

L2 Tool Steel can be welded, but care must be taken to avoid cracking. Preheating before welding and post-weld heat treatment are essential to relieve stresses and ensure the integrity of the weld. The choice of filler metal is crucial for achieving desired mechanical properties in the weld zone.

Machinability

Machining Parameter L2 Tool Steel AISI 1212 Notes/Tips
Relative Machinability Index 60% 100% Requires slower cutting speeds.
Typical Cutting Speed (Turning) 30 m/min 50 m/min Use carbide tools for best results.

Machinability of L2 Tool Steel is moderate, requiring specific tooling and cutting conditions. Carbide tools are recommended for effective machining, and slower cutting speeds may be necessary to prevent tool wear.

Formability

L2 Tool Steel is not particularly suited for extensive forming processes due to its high hardness and brittleness. Cold forming is limited, and hot forming should be conducted at elevated temperatures to reduce the risk of cracking. The work hardening effect can also complicate forming operations.

Heat Treatment

Treatment Process Temperature Range (°C) Typical Soaking Time Cooling Method Primary Purpose / Expected Result
Annealing 800 - 900 1 - 2 hours Air Softening and stress relief.
Quenching 1000 - 1100 30 minutes Oil or Water Hardening and formation of martensite.
Tempering 500 - 600 1 hour Air Reducing brittleness and increasing toughness.

The heat treatment processes for L2 Tool Steel involve austenitizing, quenching, and tempering to achieve the desired hardness and toughness. The transformation from austenite to martensite during quenching is critical for developing the steel's high hardness. Tempering is essential to reduce brittleness and enhance toughness, making the steel more suitable for practical applications.

Typical Applications and End Uses

Industry/Sector Specific Application Example Key Steel Properties Utilized in this Application Reason for Selection (Brief)
Automotive Cutting tools High wear resistance, toughness Required for precision cutting.
Aerospace Molds for composite materials High hardness, thermal stability Essential for high-performance applications.
Manufacturing Dies for stamping Excellent hardenability, wear resistance Durability under high-stress conditions.

Other applications include:
- Tooling for machining operations
- Punches and dies for metal forming
- Wear plates in high-abrasion environments

L2 Tool Steel is chosen for these applications due to its balance of hardness and toughness, ensuring long tool life and reliability under demanding conditions.

Important Considerations, Selection Criteria, and Further Insights

Feature/Property L2 Tool Steel AISI D2 SKD11 Brief Pro/Con or Trade-off Note
Key Mechanical Property High hardness High hardness Moderate hardness L2 offers better toughness than D2.
Key Corrosion Aspect Fair Poor Good L2 is less corrosion-resistant than SKD11.
Weldability Moderate Poor Fair L2 requires careful welding practices.
Machinability Moderate Good Fair D2 is easier to machine than L2.
Approx. Relative Cost Moderate Moderate High Cost varies based on market demand.
Typical Availability Common Common Common All grades are widely available.

When selecting L2 Tool Steel, considerations include its mechanical properties, corrosion resistance, and suitability for welding and machining. While it offers excellent wear resistance and toughness, its susceptibility to corrosion and challenges in welding must be factored into the design and application process.

In conclusion, L2 Tool Steel remains a vital material in the tool and die industry, providing a unique combination of properties that cater to high-performance applications. Its careful selection and processing can lead to significant advantages in manufacturing and engineering contexts.

Back to blog

Leave a comment