St12 Steel: Properties and Key Applications Overview
共有
Table Of Content
Table Of Content
St12 steel, also known as DC01, is a low-carbon mild steel primarily used in the production of cold-rolled sheets and strips. Classified under the EN 10130 standard, it is characterized by its excellent formability and weldability, making it a preferred choice in various engineering applications. The primary alloying element in St12 is carbon, which is kept at a low percentage (typically below 0.12%), ensuring good ductility and malleability. This steel grade is commonly used in automotive, appliance, and general manufacturing industries due to its favorable mechanical properties and cost-effectiveness.
Comprehensive Overview
St12 steel is classified as a low-carbon mild steel, which is known for its excellent ductility and formability. The primary alloying element is carbon, with a typical composition of less than 0.12%. This low carbon content contributes to its soft nature, making it easy to shape and form without cracking. St12 is often used in applications requiring deep drawing and bending, such as automotive body panels and appliance casings.
Key Characteristics:
- Formability: St12 exhibits outstanding formability, allowing it to be easily shaped into complex geometries.
- Weldability: The low carbon content enhances its weldability, making it suitable for various welding techniques.
- Surface Finish: It can be produced with a smooth surface finish, which is essential for aesthetic applications.
Advantages:
- Excellent formability and ductility.
- Cost-effective for mass production.
- Good weldability and surface finish.
Limitations:
- Limited strength compared to higher carbon steels.
- Lower resistance to wear and corrosion.
- Not suitable for high-temperature applications.
St12 steel holds a significant position in the market due to its versatility and cost-effectiveness. Its historical significance is rooted in the automotive industry, where it has been used extensively for body panels and structural components.
Alternative Names, Standards, and Equivalents
| Standard Organization | Designation/Grade | Country/Region of Origin | Notes/Remarks |
|---|---|---|---|
| UNS | G10080 | USA | Closest equivalent to St12 |
| AISI/SAE | 1008 | USA | Minor compositional differences |
| ASTM | A1008 | USA | Standard specification for cold-rolled steel |
| EN | DC01 | Europe | Standard designation for low-carbon steel |
| JIS | SPCC | Japan | Similar properties, used in automotive applications |
| ISO | 10130 | International | General standard for cold-rolled steel sheets |
The table above outlines various standards and equivalents for St12 steel. Notably, while grades like SPCC and A1008 are often considered equivalent, they may have subtle differences in mechanical properties or processing methods that could affect performance in specific applications.
Key Properties
Chemical Composition
| Element (Symbol) | Percentage Range (%) |
|---|---|
| Carbon (C) | 0.06 - 0.12 |
| Manganese (Mn) | 0.30 - 0.60 |
| Phosphorus (P) | ≤ 0.025 |
| Sulfur (S) | ≤ 0.025 |
| Iron (Fe) | Balance |
The primary alloying elements in St12 steel include carbon, manganese, phosphorus, and sulfur. Carbon is crucial for determining the hardness and strength of the steel, while manganese enhances its toughness and hardenability. Phosphorus and sulfur are considered impurities that can adversely affect ductility and weldability if present in excessive amounts.
Mechanical Properties
| Property | Condition/Temper | Typical Value/Range (Metric) | Typical Value/Range (Imperial) | Reference Standard for Test Method |
|---|---|---|---|---|
| Tensile Strength | Annealed | 270 - 410 MPa | 39 - 59 ksi | ASTM E8 |
| Yield Strength (0.2% offset) | Annealed | 140 - 250 MPa | 20 - 36 ksi | ASTM E8 |
| Elongation | Annealed | 28 - 40% | 28 - 40% | ASTM E8 |
| Hardness (Brinell) | Annealed | 70 - 100 HB | 70 - 100 HB | ASTM E10 |
| Impact Strength | - | 30 J (at -20°C) | 22 ft-lbf (at -4°F) | ASTM E23 |
The mechanical properties of St12 steel make it suitable for applications that require good ductility and moderate strength. Its yield strength and tensile strength are adequate for forming processes, while its elongation indicates excellent ability to deform without fracture.
Physical Properties
| Property | Condition/Temperature | Value (Metric) | Value (Imperial) |
|---|---|---|---|
| Density | - | 7.85 g/cm³ | 0.284 lb/in³ |
| Melting Point | - | 1425 - 1540 °C | 2600 - 2800 °F |
| Thermal Conductivity | 20 °C | 50 W/m·K | 34.6 BTU·in/(hr·ft²·°F) |
| Specific Heat Capacity | 20 °C | 0.49 kJ/kg·K | 0.12 BTU/lb·°F |
| Electrical Resistivity | 20 °C | 0.0000175 Ω·m | 0.000011 Ω·ft |
The physical properties of St12 steel, such as density and thermal conductivity, play a significant role in its applications. The relatively high density contributes to its strength, while good thermal conductivity is beneficial in applications where heat dissipation is critical.
Corrosion Resistance
| Corrosive Agent | Concentration (%) | Temperature (°C) | Resistance Rating | Notes |
|---|---|---|---|---|
| Atmospheric | - | - | Fair | Susceptible to rust |
| Chlorides | - | 20 - 60 | Poor | Risk of pitting |
| Acids | - | - | Poor | Not recommended |
| Alkalis | - | - | Fair | Moderate resistance |
St12 steel exhibits limited corrosion resistance, particularly in chloride environments where pitting can occur. Its performance in acidic and alkaline conditions is also poor, making it unsuitable for applications exposed to harsh chemicals. Compared to stainless steels, St12's susceptibility to corrosion is a significant disadvantage, particularly in outdoor or marine environments.
Heat Resistance
| Property/Limit | Temperature (°C) | Temperature (°F) | Remarks |
|---|---|---|---|
| Max Continuous Service Temp | 300 °C | 572 °F | Beyond this, properties degrade |
| Max Intermittent Service Temp | 350 °C | 662 °F | Short-term exposure only |
| Scaling Temperature | 600 °C | 1112 °F | Risk of oxidation at this temp |
St12 steel is not designed for high-temperature applications. Its mechanical properties begin to degrade significantly above 300 °C, and it is prone to oxidation at elevated temperatures. This limits its use in environments where thermal stability is crucial.
Fabrication Properties
Weldability
| Welding Process | Recommended Filler Metal (AWS Classification) | Typical Shielding Gas/Flux | Notes |
|---|---|---|---|
| MIG | ER70S-6 | Argon/CO2 | Good for thin sections |
| TIG | ER70S-2 | Argon | Clean welds, less spatter |
| SMAW | E7018 | - | Requires preheat |
St12 steel is highly weldable, making it suitable for various welding processes. Preheating may be necessary to avoid cracking, especially in thicker sections. Post-weld heat treatment can enhance the properties of the weld zone.
Machinability
| Machining Parameter | St12 Steel | AISI 1212 | Notes/Tips |
|---|---|---|---|
| Relative Machinability Index | 100 | 130 | St12 is less machinable than 1212 |
| Typical Cutting Speed (Turning) | 80 m/min | 100 m/min | Use high-speed steel tools |
St12 steel has moderate machinability. While it can be machined effectively, it requires careful attention to cutting speeds and tool materials to achieve optimal results.
Formability
St12 steel excels in formability, making it suitable for deep drawing and stamping applications. Its low yield strength allows for significant deformation without fracture, and it can be easily shaped into complex geometries.
Heat Treatment
| Treatment Process | Temperature Range (°C) | Typical Soaking Time | Cooling Method | Primary Purpose / Expected Result |
|---|---|---|---|---|
| Annealing | 600 - 700 | 1 - 2 hours | Air | Softening, improving ductility |
| Normalizing | 800 - 900 | 1 - 2 hours | Air | Refining grain structure |
Heat treatment processes like annealing can significantly improve the ductility and workability of St12 steel. During annealing, the microstructure transforms, leading to a softer material that is easier to form.
Typical Applications and End Uses
| Industry/Sector | Specific Application Example | Key Steel Properties Utilized in this Application | Reason for Selection |
|---|---|---|---|
| Automotive | Body panels | Excellent formability, weldability | Cost-effective, easy to shape |
| Appliance | Refrigerator casings | Smooth surface finish, good ductility | Aesthetic appeal, easy to manufacture |
| General Manufacturing | Stamped parts | Moderate strength, good machinability | Versatile for various applications |
St12 steel is widely used in the automotive and appliance industries due to its excellent formability and cost-effectiveness. Its ability to be easily shaped and welded makes it ideal for producing complex components.
Important Considerations, Selection Criteria, and Further Insights
| Feature/Property | St12 Steel | AISI 1008 | SPCC | Brief Pro/Con or Trade-off Note |
|---|---|---|---|---|
| Key Mechanical Property | Moderate Strength | Moderate Strength | Moderate Strength | Similar strength profiles |
| Key Corrosion Aspect | Fair | Fair | Poor | St12 has better corrosion resistance than SPCC |
| Weldability | Good | Good | Fair | St12 is preferred for welding |
| Machinability | Moderate | Good | Good | AISI 1008 is easier to machine |
| Formability | Excellent | Good | Good | St12 excels in forming processes |
| Approx. Relative Cost | Low | Low | Low | Cost-effective for mass production |
| Typical Availability | High | High | High | Widely available in the market |
When selecting St12 steel, considerations include its mechanical properties, corrosion resistance, and cost-effectiveness. Compared to alternatives like AISI 1008 and SPCC, St12 offers a balanced performance for applications requiring good formability and weldability. Its availability and low cost make it a popular choice in various manufacturing sectors.
In conclusion, St12 steel is a versatile low-carbon mild steel that excels in formability and weldability, making it suitable for a wide range of applications. Its properties, while advantageous in many respects, also come with limitations that must be considered during material selection.
